Safety Data Sheet

SAFETY DATA SHEET - LC LABORATORIES
REVISION DATE: JULY 1, 2019

SECTION 1. IDENTIFICATION:
Trade name: Ingenol 3-Angelate
Product Number: I-5900
Manufacturer/Supplier:
LC Laboratories
165 New Boston Street
Woburn, MA 01801 USA
+1-781-937-0777 Fax: +1-781-938-5420


SECTION 2. HAZARD(S) IDENTIFICATION:
Hazard Description: Toxic; Irritant
Toxic if swallowed or inhaled
Can cause severe eye damage and skin burns
Skin reactions may include erythema (redness), flaking/scaling, crusting, swelling, vesiculation/pustulation (blister/pustule formation), and erosion/ulceration
Signal Word: Danger
GHS Hazard Statements:
H302+312+332 - Harmful if swallowed, in contact with skin or if inhaled
GHS Precautionary Statements:
P2562 - Do not get in eyes, on skin or on clothing
WARNING: For Laboratory Research Use Only

 

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS:
Chemical Name: (2Z)-(1aR,2S,5R,5aS,6S,8aS,9R,10aR)-1a,2,5,a,6,9,10,10a-Octahydro-5,5a-dihydroxy-4-(hydroxymethyl)-1,1,7,9-tetramethyl-11-oxo-1H-2,8a-methanocyclopenta[a]cyclopropa[e]cyclodecen-6-yl ester 2-methyl-2-butenoic acid
Synonyms: PEP-005, 3-Ingenyl Angelate, Ingenyl 3-Angelate, 3-Angeloyl Ingenol, 3-Angelyl Ingenol, Ingenol Mebutate, Picato
Hazardous Ingredient: Ingenol 3-Angelate
CAS Registry Number: 75567-37-2
Molecular Weight: 430.53
Molecular Formula: C25H34O6


SECTION 4. FIRST-AID MEASURES:
After Inhalation: If inhaled, remove to fresh air; if breathing is difficult, give oxygen; if breathing stops, give artificial respiration
After skin contact: flush with copious amounts of water; remove contaminated clothing and shoes; call a physician
After eye contact: flush with copious amounts of water; assure adequate flushing by separating the eyelids with fingers; call a physician
After swallowing: if swallowed, wash out mouth with copious amounts of water; call a physician


SECTION 5. FIRE-FIGHTING MEASURES:
Suitable extinguishing agents: water spray, carbon dioxide, dry chemical powder or foam
Protective equipment: wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes
Unusual fire hazard: may emit toxic fumes under fire conditions


SECTION 6. ACCIDENTAL RELEASE MEASURES:
Person-related safety precautions: cordon off area of spill; wear self-contained breathing apparatus, protective clothing and heavy rubber gloves
Measures for cleaning/collecting: absorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); decontaminate surfaces and equipment by scrubbing with alcohol; dispose of contaminated material according to Section 13


SECTION 7. HANDLING AND STORAGE:
Information for safe handling: avoid contact with skin, eyes and clothing; material may be an irritant
Storage: store solid and solutions at -20 ºC


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION:
Personal protective equipment as follows:
Breathing equipment: NIOSH/MSHA-approved respirator
Protection of hands: handle with Nitrile rubber gloves with minimum thickness of 0.11 mm (4.3 mil). This recommendation should not be interpreted as offering an approval for any specific use conditions. Please review this recommendation with a safety officer to evaluate if it is appropriate for the anticipated use.
Eye protection: chemical safety goggles

 

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES:
Form: crystalline solid; granular or powder
Color: white
Odor: none
Melting point/Melting range: not determined
Danger of explosion: none
Solubility in / Miscibility with water: not determined
Solvent content: none
Organic solvents: soluble in DMSO or ethanol


SECTION 10. STABILITY AND REACTIVITY:
Stability: avoid acids and bases
Thermal decomposition / conditions to be avoided: protect from light and heat
Dangerous products of decomposition: thermal decomposition may produce toxic gases such as carbon monoxide and carbon dioxide


SECTION 11. TOXICOLOGICAL INFORMATION:
RTECS #: not available
Acute toxicity: 
Primary irritant effect:
On the skin: strongly corrosive; causes severe burns; may cause deep tissue damage; poses risk of sensitization or allergic reaction
On the eye: strongly corrosive; causes severe eye damage
Inhalation: toxic if inhaled; dust is corrosive and leads to serious dyspnea (shortness of breath) and lung edema
Ingestion: toxic if swallowed; strongly corrosive causing severe burning pains in the mouth, throat, and stomach


SECTION 12. ECOLOGICAL INFORMATION:
General notes: no data available
Treat as potentially toxic if released into the environment


SECTION 13. DISPOSAL CONSIDERATIONS:
Dispose of in accordance with prevailing country, federal, state and local regulations


SECTION 14. TRANSPORT INFORMATION:
UN number: 2928
DOT: Toxic solid, corrosive, organic, n.o.s. (Ingenol Mebutate), Class: 6.1, Packing group: I
IMDG: Toxic solid, corrosive, organic, n.o.s. (Ingenol Mebutate), Class: 6.1, Packing group: I
IATA: Toxic solid, corrosive, organic, n.o.s. (Ingenol Mebutate), Class: 6.1, Packing group: I

 

SECTION 15. REGULATORY INFORMATION:
Code letter and hazard designation of product:
Hazard-determining components of labeling:
EU Risk And Safety phrases:
S9: Keep container in a well-ventilated place
S20: When using do not eat or drink
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S28: After contact with skin, wash immediately with plenty of water
S36/37/39: Wear suitable protective clothing, gloves and eye/face protection
S45: In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
R23/25: Toxic by inhalation and if swallowed
R36/37/38: Irritating to eyes, respiratory system and skin


SECTION 16. OTHER INFORMATION:
The above information is believed to be correct based on our present knowledge but does not purport to be complete. For research use only by trained personnel. The burden of safe use of this material rests entirely with the user. LC Laboratories disclaims all liability for any damage resulting from use of this material.
Reviewed:  July 1, 2019